Lotus Club Queensland
Dedicated to the promotion and enhancement of the Lotus experience
Login
Register
  • Home
  • About Us
  • Membership
    • Member Login
  • Events
    • Calendar
  • Motorsport
    • Lakeside DTC Timed Laps
    • LAKESIDE DTC RESULTS
  • Magazine
  • For Sale
    • Merchandise
    • Classifieds
  • Posts
  • Galleries
  • Directory
    • Suppliers & Parts
    • Advertisers
  • Archives
The-finished-billy-cart

The Red Bull Billy Cart Challenge

Red Bull Billy Cart 2015 / James Bond – Lotus Seven

By John Barram

It all started a couple of months ago when our son Richard requested my involvement if he was lucky enough to be accepted into the first Australian Red Bull Billy Cart challenge. Now Red Bull, being Red Bull, don’t have an ordinary soapbox race. They have a comedy event where a team of four is to build something from scratch, do an amusing 30 sec skit related to their “theme”, then run the billy cart down the course, through slaloms, over jumps and even down stairs. So I watched the YouTube clips, most of which involved riding something like a giant hamburger down the track until it fell apart over the jump. Hmmm.

151120 Ghostbuster
Crossing the finish line
Fitting the front guards
Ghostbusters
No problems for Bond and the Lotus
On the track
Ready to go with Bond, Moneypenny and Bond girl (in jacket).
Richard fits
The finished billy cart
The frame complete
The nose as shaped

[Show slideshow]

So my response was that if I/we were going to make the effort to build something, I wanted to build a scale model Lotus Seven which would not fall apart during the event and just might have a use with my little grandsons who are fast approaching the age where they could enjoy such a thing, possibly with a motor!

There were over 500 applications and Richard was one of the 60 chosen. His theme was “The James Bond Wedding Car” so their skit involved a couple of his big, hairy mates dressed up as the bride – Miss Moneypenny – and the other as a Bond Girl in a bright orange bikini interrupting the wedding and then Bond “escaping” down the track in the Lotus Seven.

So we had about six weeks for the build. We soon established 60% was the smallest we could go, so we got some steel and started cutting and welding and in three days had a rough frame. Meanwhile Richard had been scouting for appropriate wheels and had come up with mini moto-cross wheels, complete with brakes. The people at the Big Kart Track were keen to help and came up with front upright/axle/steering arm assemblies, plus a steering column and a seat from their karts. We went with a simple swing arm front suspension with spring/shock assemblies from a little quad bike.

The back axle we welded rigidly to the frame in the name of simplicity and ruggedness. Richard would need padding on his seat! By this time my brother David had got involved, and the pace quickened.

We could see from the previous races that Red Bull was setting tougher and tougher courses, with lots of the racers breaking over the jumps. So as soon as we had it mechanically complete it was test time. We easily achieved 48KPH on the sort of slope expected. It steered and it braked. Then for the jump. The first at about 30kph over 25cm was a breeze. So we went to 50cm with a steeper approach. Richard and cart flew through the air rotating steadily forward until he landed nose down at 45%, crunching the frame on to the roadway as the suspension bottomed out. But nothing broke and nothing bent. So we rearranged things to double the front spring rates and left it at that. It was time to get serious on the body.

Flat aluminium panels are no challenge to people who have been around Clubman race cars as long as David and I have, so these were soon sorted. We have access to a set of rollers so the bonnet and rear corners soon followed. But the most complex shapes on a Seven are the mudguards and nose.

I had a 45 year old pair of Seven front guard moulds which were no longer serviceable so I was able to cut the mould down to about 60% length in a way that gave a reasonable approximation of the full thing. Done. They just needed a lot of filling and finishing. In the “old race car parts” pile we came up with a pair of Clubman front guards which had enough flex in them to pull them in to the tighter radius required. A bit of trimming here and there and we had rear guards. But we could see no real shortcuts for the nose. So I made up a wooden frame and glued on surfboard foam. I then took to it with knives and sanding equipment. By the end of the day I had the shape of a nose, at least good enough for this exercise, so it went off to a mate for coating in fibreglass.

The fibreglass panels were painted, we sorted the brakes, checked the wheel-alignment, fitted head lights and a “windscreen” and with a few days to spare were ready to roll. Then off to Sydney with it in the back of Richard’s Prado like it had been built to fit. Pure fluke!

There were plenty of carts with an Australian theme and plenty of laughs. There was a Harbour Bridge, an Opera House, a meat pie, a Chiko roll, a thong, two shrimps on a barbie, etc. There was a beautifully built little Delorean and Derek Dean’s boys were there with a Ghostbusters entry.

The track, however, was mild compared to the more recent ones used by Red Bull. Most carts built up very little speed on the mostly gentle slope and the 20cm jump held few fears. It was a bit of an anti-climax for us. In speed our cart was about 12th out of the 57 runners.

The winner was the Harbour Bridge, iconic, beautifully built and one of the quickest carts there. It was a lot of work but a lot of fun. Now to fit it out for the grandsons!

A History of the Lotus Seven LCQ wins 2015 Interclub Challenge

Related Posts

mp-banner

Events, Gallery 2022, Homepage, Racing

Morgan Park Sprints R4

gold-rush-banner

Events, Gallery 2022, Homepage, Racing

Gold Rush Hill Sprint – 2022

leyburn-banner

Events, Gallery 2022, Homepage, Racing

Leyburn 2022

Random images

IMG_0137 Rob-in-his-4WD 1-Drivers-briefing-1 jensen-cu IMG_5294 CRW_6576_RJ Tiger_Moth_Toowoomba Lotus_Lineup MGP2201 IMG_6508 IMG_6188 Morning-tea-at-Flavours 123_2356_IMG McL_13 IMG_8420 121_2109_IMG IMG_6754 image_210 6_IMG_9530 3_Lots_of_rain_means_landslides Carina_Clive_Maree_Mal_Daryl_Shane_Russell_Jenny 20161105_100109 172_THC22_2022-7 20210905_091321 Alex-Molocznyk-with-a-mentor-on-board-by-SDPICS Des-Hill-ready-for-scrutineering-A-Stevens IMG_2478 20180916_072314 elises-3 Cris and Meg 20161106_145815 IMG_8984 Martin deep in thought John B in his 7 NSX_pic2 chris-derek Jenny soaking up the atmosphere Ghostbusters Tony-and-Trophy-before-the-event broken-hill Tims-Europa-rear Garage-at-the-Lotus-Hilton IMG_8457 Mar-main-10 Mar-main-7 Jan-main-14 Jan-main-13 Greg-Brays-Elan-climbing-up-the-mountain P1060279 That-was-a-tricky-corner Checking-out-the-competition A-shared-table main-26a IMG_4889 2006_08_27_Gympie_Skid_Pan0111 IMG_0263_1 MG_7037 Ploughman's Lunch Ploughman's Lunch 1426854264_0b044007d8_m_1 Renault Alpine A110 20090822_072 John_Lungren_Lotus_7 IMG_8507 20090822_057 P1020821 P8310121 P1020792 Club_Lotus_Dec_08_014 P1020211 IMG_8015 IMG_8012 IMG_0549 IMG_0535 IMG_0519 IMG_5087 2009_Maccleans_Bridge_008 image_089 122_2249_IMG 122_2240_IMG IMAG5927 Greg-Bray-Lotus-61 Craft-Beer John and Debbie's Evora 2 In-full-flight-across-the-Gobi-Desert DSC_0357 Dick IMG-3985 Chef Mal with Colin photo bombing_gw 11-Ruth-Alan Martins Nose 3 the-blingster MG_4426_GW IMG_8197 Dick the timer Vyvyan in race gear IMG_6185 Transport-Museum-Dolomite-1 Hyundai Excel 1 main-70

Recent Articles

  • Morgan Park Sprints R4
  • Kev’s Big Day Out
  • Duratec Elise – better late than never
  • Gold Rush Hill Sprint – 2022
  • Marburg Pub Run – 4 Sept 2022
  • Unique +2 Road Trip to Brisbane
  • Leyburn 2022
  • August 2022 DTC

Latest Gallery Images

20220220_093834 20220220_093818 20220220_093827 20220220_093743 20220220_093812 20220220_093730

Search articles by category

Archived articles

Lotus Club Queensland
© Lotus Club Queensland   |   Site by Black Eye Studios